5.6 Grade Carbon Steel High Hardness Plain Washer For DHS35 Screw

Plain Surface 5.6 Grade Carbon Steel High Hardness Plain Washer For DHS35 Screw

A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a screw or nut. Other uses are as a spacer, spring (belleville washer, wave washer), wear pad, preload indicating device, locking device, and to reduce vibration (rubber washer). Washers usually have an outer diameter (OD) about twice the width of their inner diameter (ID). Washers are usually metal or plastic. High quality bolted joints require hardened steel washers to prevent the loss of pre-load due to Brinelling after the torque is applied. Type Demension Weight (Kg/Mpcs) Spring wsaherFe6(UIC864-3) diam: 25 90 Spring washer AREA67 7/8 90.55 Spring washer AREA67 1 152.33 Spring washer AREA67 1-1/8 187.65 Plain pattern washer 7/8 70.46 Plain pattern washer 1 78.03 Plain pattern washer 1-1/8 85.32 Flat washer ULS6 47/23/4 41 Flat washer ULS6 50/25/4 42

DIN 6796 Heavy Duty Locking Washer

Manufactured to specification DIN 6796 these heavy duty bolting washers are perfect for bolted connections using bolts that range from grade 8.8 to 10.9.

Made from carbon steel C60 (DIN 1.0601) or similar with a self finish or mechanical zinc finish also available from stock.

Other materials and surface treatments available on request.